Rules and automation
Decide when your team needs a heads-up.
Set the conditions that matter to your operation, then choose the response. A temperature reading, device event, or location change can start the next step.
Example rule
Cold room alert
Trigger
A new cold room temperature reading arrives.
Decide
Check whether the temperature is above 8 °C.
Act
Raise an alert and notify the team.
In your day-to-day work
From a reading to the right response.
- 01
Choose where a rule applies
Apply a rule to a device, a profile, an asset, or a category. Add exceptions when a particular unit needs different treatment.
- 02
Connect a few steps
Build a flow that checks conditions, sends a notification, and raises an alert when needed.
- 03
Understand what triggered it
See which rule or flow raised an alert, so your team has a starting point when investigating.
A cold room goes above 8 °C.
The team needs to know when a temperature crosses its chosen limit. A rule checks incoming readings and starts the notification or alert you have configured.
- 01
Choose the readings
Apply the rule to the cold room’s device or a shared sensor profile.
- 02
Set the condition
Check whether the incoming temperature is above 8 °C.
- 03
Let the team know
Raise an alert and send a notification when the rule matches.
Let’s talk about your setup.
Tell us what you use today and what you need to keep track of.