Devices and readings
Know how your devices are doing.
Bring readings from your devices into one place. See the latest values, look back at changes, and send a command when the device needs your attention.
TRK-1842
East truck
- Speed
- 0 km/h
- Idle
- 4 min
- Battery
- 18%
Battery level
Last 2 hoursIn your day-to-day work
From setup to the next reading.
- 01
Set up similar devices together
Use a shared profile to define readings, units, device events, and how incoming data is decoded. Reuse that setup across matching devices.
- 02
See more than the latest reading
Follow telemetry over time with clear units and timestamps. Link readings to the equipment the device is monitoring.
- 03
Send the next instruction
Send commands supported by your connected hardware, such as a configuration change, from the device’s own page.
One setup for a room full of sensors.
Several cold rooms use the same temperature sensor. A shared device profile keeps their readings consistent, while each device has its own history.
- 01
Define the profile
Set the temperature field, its unit, and how incoming readings are decoded.
- 02
Connect the sensors
Use that profile for matching devices and link each one to the equipment it monitors.
- 03
Check a change
Open a device to compare its latest reading with its history.
Let’s talk about your setup.
Tell us what you use today and what you need to keep track of.